walimex pro Operator TTL T-N Nikon for Mover 400 TTL No. 21969

Product information "walimex pro TTL T-N Nikon Operator for Mover 400 TTL"
Wireless 2.4GHz wireless remote control, wireless remote control for Walimex pro Studio battery seat Mover 400 TTL
Supports u.a. TTL auto flash, flash exposure compensation and flash bracketing, high-speed sync, second shutter curtain
Remote control of all important functions of the flash such as power and flash mode (mode: manual, multi, TTL), modeling light, up to 3 groups and 8 channels
For Nikon cameras D7000 / D700 / D750 / D810 / D90 / D4 / D610 / D5 / D800 / D7100 / D7500
Radio remote control operator TTL with clear large display and easy operation, requires 2xAA batteries / rechargeable batteries - not included
 
Reliable control and lightning-fast tripping
The operator TTL radio remote control is tuned to Nikon cameras with TTL function. It can be compatible flashes, e.g. control the Walimex per Studio battery seat Mover 400 TTL directly via radio (2.4 GHz). The camera with attached remote trigger operator controls the exposure fully automatically in TTL mode without the need for manual adjustments. With the radio trigger Walimex per operator TTL, the data is transmitted to the flash or several flashes at lightning speed and these are adjusted accordingly and triggered with minimal delay. The maximum synchronization time is 1 / 8.000 seconds (achievable with a maximum shutter speed of the camera of 1 / 8.000 seconds). If a slightly different exposure is desired in TTL mode, the exposure can be manually adjusted up or down three stops (in one-third increments, flash exposure compensation). Also a multiple exposure series is possible. Thus, based on the TTL measured values, an underexposed, a normal-exposed and an overexposed image are created, from which the appropriate one can then be selected. The remote control operator TTL simultaneously controls up to 3 flash groups (with one or more flashes).

Fully automatic or manual settings
As an alternative to fully automatic TTL exposure, you can also individually control the flash output using the radio operator. Each flash, or each flash group can be individually controlled, so that they can easily set even difficult to access flashes during the shoot. In addition to the manual mode, the radio remote control also supports the Multi mode (strobe function). All relevant parameters such as the number of flashes, frequency and power can be controlled via the remote control. The maximum supported synchronization time is 1 / 8.000 seconds (achievable with a maximum shutter speed of the camera of 1 / 8.000 seconds). Exposure is possible at appropriate shutter speeds on the first or second curtain.
 
Intuitive to use
The remote control requires 2 standard AA batteries or rechargeable batteries (not included in delivery). A clear display makes it easy to set the important parameters. The settings are simple and, to a large extent, intuitive. A detailed manual (German and English) also helps with tricky photo shoots.
Tested camera models
The remote control has been tested with the following Nikon camera models: D7000 / D700 / D750 / D810 / D90 / D4 / D610 / D5 / D800 / D7100 / D7500. If your model is not listed here, we recommend a self-test and possibly a USB firmware upgrade.

technical description
 
Walimex per operator TTL T-N
Compatible cameras
Nikon cameras supporting i-TTL, e.g. D7000 /
D700 / D750 / D810 / D90 / D4 / D610 / D5 / D800 /
D7100 / D7500
exposure
i-TTL automatic flash, manual,  Strobe function
channel  1 to 8
Wireless radio ID  1 to 30
Number of groups  3 (A, B, C)
Radio range  about 25 meters
Control of the power ratio  1: 8 - 1: 1 - 8: 1, in steps of 1/2 f-number
Flash exposure compensation  � 3 in 1/3 increments
Flash Exposure Bracketing  � 3 in 1/3 increments 

Flash Exposure Lock  Yes

high-speed synchronization  up to 1/8000 s
Manual adjustment of the Flash output
Adjustable between 1/1 and 1/128 (in increments  from 1/3 EV)
Strobe function  up to 20 flashes, up to a frequency of 30 Hz
AF focusing light beam  Yes
Firmware update  Yes
voltage source  two AA alkaline batteries or Ni-MH batteries
size  90 x 56 x 40 mm