Product features:
The walimex pro audio adapter is a passive 2-channel XLR Adapters or DSLR cameras with a built-in microphone jack. It offers you the opportunity to a variety of audio devices such as XLR, wireless microphones, external audio mixer or preamp to connect through the adapter to the camera. Through the headphone jack, you have an optimum control over the eye undertaken tone. The audio adapter can be attached easily from below via a 1/4-inch thread on the camera.
Features
Dual Trim controller: With the dual trim control You can correct and adjust the recording level.
Mono / Stereo switch: selecting the output mode. The mono mode is to choose for a mono microphone. It can transform the mono audio signals in each channel and output stereo audio signal.
The Stereo mode is available for two-channel recordings, it offers two separate audio channels.
LINE / MIC. Switch: Mic level is for microphones or radio systems. The LINE-level audio devices with a line output. The signal is attenuated at 40dB.
GND1 / GND2 Ground Switch: Eliminates noise such as hum and noise. GND1: Disconnects the output signal from the input signal, thereby preventing the noise of the input signal to the output signal. GND2: Controls the output signal to the input signal.
Technical specifications:
Input | 2x XLR Input symmetrically |
1x 3,5mm jack input | |
Output | 1x 3,5mm Audio-Output |
Input signal | MIC: -35dBu, Line: -10 to +4dBu |
Output signal | General Mic Levels |
Frequency range | 10 Hz - 100kHz (+/-1,5 dB) |
Weight | 191g |
Size (L x W x H) | 87 x 80 x 52 mm |
Included in delivery:
This Product was added to our catalogue on 31/08/2015.