walimex pro Aptaris Blackmagic Pocket Performance No. 20458

Product features:

Blackmagic Pocket Performance Set
The Aptaris Blackmagic Performance Set has been put together for demanding movie makers. Besides the precisely fitting Aptaris Blackmagic Pocket Cage it also includes the Aptaris rod, handle and shoulder module. Apart from this it also comes with a vast number of accessories to provide unlimited flexibility. This set can be extended from a compact “Point and Shoot” set-up to a high performance shoulder rig. All parts have been developed in Germany and are made of extremely light aircraft aluminium.

Aptaris for Blackmagic Pocket
As it was specially developed for the camera Blackmagic Pocket, this system adapts to 100 % to your system camera. “Aptaris” is thereby simply fastened to the camera by means of a 1/4 inch thread.
Due to its vast number of 1/4 inch threads on all sides as well as a 3/8 inch thread on the bottom side, a vast amount of accessories, like microphones or LED-lights, can be mounted, just as desired. The adjustable handle, which can be mounted at the top, the bottom or at the sides, just as required, provides additional flexibility in use. This enables also filming near ground level. You can obviously also mount the Aptaris on a tripod. Access to battery compartment, memory card etc. is in any case ensured.
Aptaris is a system. This is why the cage can be extended with numerous accessories, like e.g. the Aptaris rod module or the shoulder support module. The rod module offers ample space for the attachment of additional accessories, like a Follow Focus and a Matte box With their diameter of 15mm the rods are industrial standard, thereby enabling combination with all common accessory parts. Due to the supplied quick-release plate, the rod module can be simply attached to the Aptaris system via a slide mechanism. With the Aptaris shoulder support module you convert the cage to a complete rig in almost no time at all - for even more flexibility, especially in mobile use. Aptaris can obviously also be extended at any time with e.g. hot shoe adapters or a separate L-angle.
Developed in cooperation with the German manufacturer SIX, Aptaris convinces with highest accuracy in workmanship, outstanding material properties and well thought-out engineering. Continuous quality inspections ensure premium quality and extreme longevity, even under highest loads in permanent use. This is supported by exceptional material properties: Aptaris is made of extremely light aircraft aluminium and stainless steel. With its weight of only 254 g, incl. the handle, Aptaris Blackmagic Pocket is very comfortable in use and also very stable. Thanks to the black anodizing Aptaris additionally scores with its noble design.

Aptaris Rod module
For even higher flexibility walimex pro offers a rod module for the innovative walimex pro Aptaris cage system. The rod module is simply mounted to the main unit by means of an innovative quick-action lock solution. For professional results you can attach further accessories, like e.g. Follow Focus or a Matte box to shield off sun light, to the 15 mm Ø rods. The rod module also offers highest flexibility in use: It is adjustable in height and, with a thread on the bottom side, it can be mounted on a tripod or a quick-release plate.

Aptaris handle module
The Aptaris handle module not only extends your Aptaris Cage, but can also be combined with numerous common rigs. The module is thereby simply mounted to the rods of the rig. Due to their ergonomic design, the handles feel particularly comfortable in your hand. Suitable for rods with a 15 mm diameter (industrial standard).

Aptaris shoulder module
The Aptaris shoulder module not only extends your Aptaris Cage, but can also be combined with a vast number of common rigs. The module is thereby simply mounted to the rods of the rig. Suitable for rods with a 15 mm diameter (industrial standard). The shoulder module can be individually adapted. Soft shoulder pads additionally ensure highest carrying comfort in any situation. The shoulder module is suitable for the left and right shoulder.

Aptaris cable protection
With this cable protection, torn off cables are a matter of days gone by. This convenient cable protection protects all cables connected to your camera and the associated sockets against damage. With the ¼ inch thread, this cable protection is compatible to many other systems. Just like all accessory parts of the Aptaris system, this cable protection has also been developed and made in Germany and is characterized by highest quality workmanship. Extremely light and long lasting aircraft aluminium is also used for this product.

Aptaris extension arms
These extension arms give you the possibility to move the handles further away from the handle module and to adapt your carrying position as required. The arms are thereby simply and twist-locked fastened to the handle module via rosettes. Convenient are also the three ¼ inch threads, which can be used to mount further accessories. The arms are obviously also made in Germany, manufactured from extremely light aircraft aluminium, just like the complete Aptaris system.

Aptaris lens support
With this lens rest you can support and stabilize long and heavy lenses. The support is adjustable in height and can thus be adapted to your individual requirements. Compatible with all rods in the 15 mm LWS. Just like all accessory parts of the Aptaris/Mutabilis system, this lens support has also been developed and made in Germany and is characterized by highest quality workmanship. Extremely light and long lasting aircraft aluminium is also used for this product.

Aptaris 15mm Rod clamp
If you do not want to carry camera and shoulder module offset, but on one axis, you can combine the Rod Clamp with the shoulder module and thereby change the position of your camera. The Rod Clamp is simply pushed over the Rods for fastening. You can also use the rod alternatively for mounting additional accessories. The Rod Clamp has three ¼ inch threads to serve this purpose. The clamp is compatible with 155mm Rods and can therefore be combined with most Rigs. The Rod Clamp is, like all other accessory parts of the Aptaris system, obviously also made in Germany

Aptaris Monitor plate
This monitor bracket offers full flexibility: Depending on the application you can mount these either to the handle module, or directly on the Cage by usingb two ¼ inch threads. The monitor is also mounted to the plate via a ¼ inch thread. The angle can thereby freely adjusted, giving you optimal view to the monitor at any time. The monitor plate can be combined with any Cage. The monitor plate is developed and manufactured in Germany, just like the overall Aptaris system.

Aptaris Rod clamp double
The Aptaris Double Clamp convinces with its double function: You can on the one hand flexibly adapt the position of your shoulder support and offset your camera upwards or downwards, as required. In connection with the shoulder module it is thus possible to work with no offset between camera and shoulder module, but on one axis. On the other hand you can fasten a second pair of Rods to compensate for height differences between Rig and lens and to e.g. use a Follow Focus even on cameras, which have the lens mounted in a higher position. The clamp is compatible with 155mm Rods and can therefore be used with most Rigs. Another convenience are the ¼ inch threads, which can be used to mount additional accessories. The Double Clamp is, like all other accessory parts of the Aptaris system, obviously also made in Germany.

walimex pro 400 mm stainless steel rods
400 mm stainless steel rods in 15 mm LWS industrial standard. Made in Germany.

Aptaris Universal Handle large
This very strong and ergonomically shaped handle can be mounted around the Aptaris Cage and Cages with ¼ inch threads as desired by using the Mini-Rails included in the scope of delivery. The handle comes with several 1/4 and 3/8 inch threads, giving you flexibility for mounting accessories. The L-bracket, which is also included in the scope of delivery, gives you full flexibility. At the same time the handle convinces with its very low weight, which is achieved by the use of very light aircraft aluminium. Just like the complete Aptaris system, the handle is also developed and manufactured in Germany.

Aptaris L-Bracket long
The long L-bracket is extremely versatile, because it can be mounted almost anywhere. It comes with a vast amount of ¼ threads, which can be used for flexibly fastening further accessories. 4 screws thereby enable fastening without getting out of place. Just like the complete Aptaris system, the L-bracket is also developed and manufactured in Germany.

Technical specifications:

Included in delivery:

• 1x walimex pro Aptaris Blackmagic Pocket Performance , consisting 1x Aptaris Cage for Blackmagic Pocket , 1x handle with two mini rails, 1x hot shoes adapter, 6x screws, L-shaped connector, 1x Rod module for walimex pro Aptaris, 1x handle adapter, 1x handle left, 1x handle right, 1x shoulder support angle piece, 2x 300 mm rods, 4x foam plastic pads, 1x handle, 1x Mini-Rail, 1x Mini-Rail long, fastening screws, 1x L-bracket, 2x 400 mm rods, 1x walimex pro Aptaris extension arm set, 1x cable protection for Aptaris, 1x walimex pro lens support, 1x walimex pro Aptaris 15mm Rod Clamp, 1x walimex pro Aptaris 15mm Rod Clamp double, 1x walimex pro Aptaris Monitor Plate, 1x walimex pro Aptaris L-bracket, long, 4x screws, 1x Hot shoe for walimex pro Aptaris Cage-System

• complete Rig-Set for the Blackmagic Pocket camera
• full flexibility for any type of use
• whether as Cage only, as compact Rig or with all accessory parts
• numerous connecting possibilities
• extremely light aircraft aluminium
• made in Germany